
Add to Cart
Rail Mount Ethernet Surge Protective device Easy Installation
Model: Trss-rj11 / 45
colour:white
Authentication: CE ECM
Working principle of product
The lightning arrester can effectively protect the power equipment. Once the abnormal voltage appears, the lightning arrester will play a protective role. When the protected device is running under normal working voltage, the arrester will not work, and it will be regarded as a circuit for the ground. Once the high voltage is present and the insulation of the protected equipment is endangered, the lightning arrester acts immediately and leads the high voltage impact current to the earth, thus limiting the amplitude of the voltage and protecting the insulation of the electrical equipment. When the overvoltage is gone, the arrester is restored to its original state quickly, so that the system can supply electricity normally. The main function of the lightning arrester is to reduce the voltage value of the protected equipment through the action of parallel discharge gap or nonlinear resistance, and to reduce the voltage value of the protected equipment, so as to protect the power equipment.
Product features
1. core components are strictly screened, stable performance and reliable operation.
2. the product has many interfaces and is easy to use. It doesn't need to worry about the number of interfaces.
3. upgrade transistor is equivalent to 2 diodes
4. metal shielding layer, to prevent electromagnetic interference, so that the signal is more stable.
Product specification
Model and specofocation | TRSS-RJ45/4 | TRSS-RJ45/8 | |||||
Rated Operating Voltage | Un | 5V/12V | |||||
Max continuous operating voltage | Uc | 6V/15V | |||||
Voltage protective level | Up(V)〈 | 40/60 | |||||
Max discharge current | Imax(8/20μS) | 5kA | |||||
Nominal discharge current | In(8/20μS) | 3kA | |||||
Response time | ns | ≤1 | |||||
Adaptive date transfer rate | 100Mbps | ||||||
Insertion loss | ≤0.3dB | ||||||
Configuration dimension | 104×25×25 | ||||||
Protective circuit | 1.2.3.6 | 1.2.3.4.5.6.7.8 | |||||
Operating condition | Temp:-40℃~+70℃ | ||||||
RH≤95%(25℃) | |||||||
Sea level elevation≤3km | |||||||
Remarks | Other max continuous operating voltage can be customized |
Product Details
The TRSS-RJ45/8 type network lightning arrester is a lightning protection measure taken by Zhejiang tohr Electric Co., Ltd. to independently develop and manufacture the network system.
It is suitable for railway communication system, mobile base station, differential station, hard disk recorder, video surveillance equipment, optical terminal and other network transmission equipment to avoid overvoltage damage such as inductive lightning stroke and electrostatic discharge introduced by the system. The grounding point is treated by special process to avoid signal interference. It adopts multi-level protection circuit, low residual pressure level and good protection effect.
Use of attention
1. lightning protector is between the protected device and the signal channel.
2. please choose the network switch lightning protector which is the same as the protected device's interface type.
3. the lightning protector of the network switch should match the working voltage of the protected device. When installing, please connect according to the installation sketch map.
4. lightning protector should be regularly tested during operation. If there is any failure, it should be maintained or replaced in time to ensure equipment safety.
Company profile
Zhejiang Raytheon Electric Co., Ltd. was founded in 2006, and is committed to provide various innovative and reliable surge protection solutions and products.
We are committed to meeting the EU Directive on waste electrical and electronic equipment. This Directive requires manufacturers of electrical and electronic equipment to put their products back into the EU market after 2005, then use or recycle them.