
Add to Cart
grounding pin household grounding pile put mine engineering rod grounded power grounding pin building lightning rod
Product introduction
the lightning rod is the lightning protection measures taken by Torre Electric Co., Ltd., which is independently developed and manufactured against lightning hazards. The lead discharge, impedance current limiting, air gap discharge and other integrated technology can produce advance pilot channel, improve the effect of flash, reduce discharge voltage and change the discharge process of lightning current. The lightning wave form is broadened, the wave head is gentle, and the amplitude is reduced, so as to extend the protection range. To avoid the phenomenon of "side attack" and "shielding failure", and effectively suppress the harm caused by ground potential counterattack, it is an ideal device to prevent direct lightning strikes.
Working principle of product
in thunderstorm weather, when charged clouds appear over high buildings, the lightning rod and the top of the tall building are all induced by a large amount of charge. Because the needle of the lightning rod is sharp, the most charge is always gathered at the tip of the conductor when electrostatic induction. In this way, the lightning rod congregates most of the charge. The lightning rod also forms a capacitor with the charged clouds, which is relatively small because the two pole of the capacitor is small and the capacitance is very small, that is to say, it can hold very little charge. When it charges more clouds, the air between the lightning rod and the cloud layer can easily be breakdown and become conductor. In this way, the charged cloud layer and the lightning rod form the path, and the lightning rod is grounded, the lightning rod can import the charge on the cloud layer into the earth, so that it does not pose a danger to the high-rise building and ensures its safety.
Product specification
Model | Specifications | With flange height M | Texture of material | working temperature |
TRSB
|
3.1 |
1.2
1.5
1.8
The highest 20m can be done |
Stainless steel
|
-40℃ ~ +80℃
|
3.3 | ||||
4.3 | ||||
5.3 | ||||
6. |
Product features
1. the pure physical structure lightning rod has no electronic devices and no aging.
2. to reduce the lightning current amplitude and steepness
3. beautiful appearance and no rust, strong antioxidant capacity
Use of attention
1. the general grounding wire should be buried in the ground 1-3 meters deep
2. the lightning arrester lanes are fixed on the preset prefabricated base.
3. the lightning arrester lanes are fixed on the preset prefabricated base.
Company profile
Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.
All types and classes of our lightning and surge arresters 20KA~200KA(8/20μS) and 15KA~50KA(10/350μS) are tested and pass all the requirements based on their class.