Zhejiang THOR Electric Co., Ltd
Professional Manufacturer for surge protection device.
Add to Cart
Surge protector 3P40KA 385KV high and low voltage cabinet lightning protection module arrester
Working principle of product
Under normal working condition, the lightning protection module is in a high resistance state. When the power supply line has lightning invasion or operation transient overvoltage, the lightning protection module will immediately pass through the response speed of nanosecond level, and limit the lightning overvoltage or transient overvoltage to the voltage range allowed by the electrical equipment, thus protecting the normal operation of the electronic equipment. After that, the lightning protection module quickly returns to the high impedance state without affecting the normal power supply of the grid.
Product specification
1. Rated Operating Voitage(UC):275V
2. Rated Operating Voltage(UN):220V
3. Voltage protective level(UP):1.5KV
4. Max discharge current(IMAX):20KA
5. Nominal discharge current(IN):10KA
6. Ressponse time(NS):<25
7. Ingress Protection Rating:IP20
Product features
1. traffic flow to further improve safety
2. core components are strictly screened, stable performance and reliable operation.
3. using the latest arc extinguishing technology to avoid fire completely
4. module is designed and installed conveniently and can be replaced directly.
Notice of product
1. connect the grounding wire of the lightning protector with the ground wire of the lightning protection system.
2. it should match the working voltage of the protected equipment. Please install according to the installation sketch.
3. lightning protection device IN as input and OUT as output, the input end is connected with the outside, and the output end of the input end of the connecting device is protected
4. The PE line of the lightning arrester must be reliably connected with the ground wire of the lightning protection system, and the connection line is short, thick and straight.
Brief introduction
Surge protector is the lightning protection measures adopted by Zhejiang toer Electric Co., Ltd. for the electrical system, which is applied to the power protection of equipment system in high lightning risk area. It can prevent all kinds of surge currents directly hitting lightning. Avoid the damage of lightning surge to other devices in the loop.
Product Installation
With 35mm standard DIN-rail mounting, connecting copper stranded conductor is 2.5~35mm²
At front of spd each pole must be setted protection---used fuse or miniature circuit breaker lightning current SPD protection,after SPD breakdown to short circuit protection.
SPD install on protected line(equipment) to the front and connected to the supply line. A class products install in the building home-entry line hold larger surge current total distribution box. B, C class products most install on the floor distribution box, D class products close to the front-end equipment that smaller surge current, smaller residual voltage place.
Company profile
Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built everything to offer a wide range of innovative and reliable surge protection solutions and products.
Product packaging:Carton packing
Transportation method
1. Express company: FEDEX,UPS,DHL,TNT
2. Trains, ships, aircraft transport